Drill 2.0mm pilot hole with external irrigation to a depth 1.0mm–2.0mm deeper than the length of the implant when anatomically possible. Choose the appropriate stoppered pilot drill to ensure the depth of osteotomy.
Use paralleling pins to evaluate the depth and alignment. Use the pilot drill to correct the angulation if necessary.
Widen the socket using sequentially larger drills without irrigation and below 50 RPM.
Harvest autogenous bone collected with i-reamer and L-reamers during the drilling process.
Remove the implant out of the PEEK package using either the transfer-retreiver tool or plastic plug and place the implant into the osteotomy.
Seat the implant with appropriate seating tip if necessary.
Use the peek or plastic plug to cover the well of the implant.
Place the harvested bone over the shoulders of the implant.
Suture the flap appropriately.